Two thread grooves,
one each side. Flat starts 2.66mm from end. Tip of needle is 2.92mm from
center line of shank. Curve starts at end of shank and is 24.5mm in
length. Shank is 23mm long. #1=.83mm diameter, #1.5=.85mm, #2=.92mm,
Needle is still available
measured that does not fit into any references.
ISMACS is an organization totally independent of
all sewing-machine manufacturers, past or present and is not
affiliated with any of the companies mentioned in these pages.
Please Note: Do
not contact any ISMACS official in an attempt to solicit a valuation -
it is not possible other than by hands-on assessment and your request
will be ignored.
All rights reserved by ISMACS INTERNATIONAL, under
International and Pan American copyright conventions. Reproduction or
copy of this page, in any form, in part or in whole, is strictly
prohibited, without prior, written permission.